[2022] CCNP Data Center 300-610 Las preguntas del examen son válidas para la preparación del examen Cisco 300-610

Posted by: Martina Comments: 0 Post Date: julio 1, 2022

Martina2022-07-01T09:20:37+00:00

300-610 Diseño del examen de certificación de infraestructura del centro de datos Cisco (DCID) es uno de los exámenes de concentración de CCNP Data Center, que prueba principalmente su conocimiento del diseño de infraestructura del centro de datos. Cuando planea tomar el examen Cisco CCNP Data Center 300-610, puede elegir las preguntas del examen CCNP Data Center 300-610 como materiales de aprendizaje. ReaLEXAM.es le brinda una opción para obtener las últimas preguntas del examen 300-610 y obtener el 300-610 diseñando la preparación del examen de la infraestructura del centro de datos Cisco (DCID) de una manera suave y eficiente. Antes de obtener las preguntas del examen Cisco 300-610, puede optar por leer las preguntas de demostración gratuitas de CCNP Center 300-610 a continuación.

Page 1 of 6

1. An engineer is designing a data center that uses FCIP.

How is QoS configured in this environment?

A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.

A separate DSCP value must be configured for all FCIP VSAN traffic.

A separate DSCP value and priority queuing must be configured for all FCIP traffic.

Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

2. Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch.

What is the minimum MTU QoS requirement for the FCoE to work?

9000 bytes

2000 bytes

2158 bytes

2240 bytes

3. DRAG DROP

A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

4. Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.

8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.

8-Gbps links and 10-Gbps links use 8B/10B encoding.

8-Gbps links and 10-Gbps links use 64B/66B encoding.

5. Which pools are used when a vNIC template is created in Cisco UCS Manager?

WWPN

UUID

MAC

6. Which authentication software natively runs within the CLI of Cisco NX-OS devices?

Python

Ansible

Puppet

Chef

7. The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches.

How is out-of-band management access provided for each VDC?

All the VDC have the same out-of-band IP address.

Each VDC has a dedicated out-of-band Ethernet management port.

Each VDC has a unique out-of-band IP address from the same IP subnet.

Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.

8. What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.

It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.

It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.

It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.

It operates at the customer-facing services layer and provides the management interface for the virtual network devices.

9. DRAG DROP

Drag the appropriate from the left onto the current UDLD modes of operation on the right.

10. Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)

zone-based QoS

multiple QoS policies that match individual devices

VSAN-based QoS

FCoE VLAN-based QoS

multiple QoS policies that match multiple devices

Page 2 of 6

11. Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

NPIV mode

FC end-host mode

NPV mode

FC switching mode

12. What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?

reduction in application performance

distance limitations

specific backup requirements

potential data loss

13. What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)

It propagates hosts reachability without support of traffic flooding.

Layer 3 failures do not propagate beyond the OTV edge device.

It extends the spanning tree between data centers.

It is an open standard.

It constrains HSRP hello messages to each data center.

14. An engineer deploys LISP VM mobility.

Which feature is configured on the interfaces that have VM mobility enabled?

IP redirects

flow control

proxy ARP

HSRP

15. Which orchestration tool should be used for the management and analytics of servers across multiple sites?

Cisco Intersight

Cisco Nexus Fabric Manager

Cisco UCS Manager

Cisco Data Center Network Manager

16. DRAG DROP

Drag and drop the SAN components from the left onto the correct design considerations on the right.

17. DRAG DROP

Drag and drop the configurations from the left onto the correct policies on the right.

18. Which two types of service profile templates does Cisco UCS support? (Choose two.)

initial

permanent

updating

temporary

connected

19. DRAG DROP

Drag and drop the technologies from the left onto the correct descriptions on the right.

20. DRAG DROP

Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

Page 3 of 6

21. Which address pool is used when a vHBA template is created?

MAC

WWPN

UUID

22. Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

WWPN

EUI

IQN

WWN

OUI

23. What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

vPC+

E-Trunk

SAN port channel

LACP port channel

24. Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?

HyperFlex Edge support

encryption offload cards

dedicated compute nodes

fabric interconnects

25. Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.

VPC+

UDLD

EVPN

OSPF

26. Refer to the exhibit.

An engineer must assign multiple Fibre Channel IDs to a single port channel.

Which two features must be enabled this goal? (Choose two.)

SAN Pin Groups on the Cisco UCS Fabric Interconnects.

NPV feature on the Cisco MDS Series.

end-host mode feature on the Cisco UCS Fabric Interconnects

NPIV feature on the Cisco MDS Series

Smart Zoning feature on the Cisco UCS Fabric Interconnects

27. Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?

border leaf

service leaf

border gateway

service gateway

28. What is a design consideration when implementing FSPF?

Routes are based on the domain I

Routes are based on the distance vector protocol.

FSPF runs only on F Ports.

FSPF runs on a per-chassis basis.

29. Which technology enables Layer 2 extension between remote data center sites?

FCIP

GRE

DMVPN

OTV

30. Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?

BFD

UDLD

MCP

LLDP

Page 4 of 6

31. What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

Layer 3 interfaces can belong to multiple VRFs.

VRF-Lite interfaces can be Layer 2.

Overlapping IP addresses are permitted on different VRFs.

Interfaces that belong to VRFs can be physical or logical.

VRF-Lite interfaces support MPL

32. What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)

supports Layer 3 port channels

disables spanning-tree

no spanning-tree blocked ports

uses all available uplink bandwidth

maintains single control plane

33. Where does Cisco UCS handle Fibre Channel traffic failover?

on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode

on the host, by using multipathing software

in the hardware on the Cisco UCS VIC 12xx adapter or later

in the hardware on any Cisco UCS VIC adapter

34. An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)

HSRP

VSS

vPC

802.1q

FEX

35. Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)

type

preshared key

port number

identifying tag

hostname

36. A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?

vPC

virtual interface

port channel

physical port

37. What influences the number of ISLs that are required between Cisco MDS Series switches?

FCoE protocol

type of storage

end-to-end oversubscription ratio

N Port virtualization

38. Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)

STP runs on the uplink ports of each VLAN, as defined by PVSTP+.

STP runs on the uplink ports of each VLAN, as defined by MST

The STP parameter configuration is unsupported.

The STP parameter configuration is supported.

STP runs on the server ports.

39. DRAG DROP

Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

40. Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

Secondary

Initial

Updating

Primary

Page 5 of 6

41. Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)

number of vHBAs

ARP entries

UUID assignment

VXLAN membership

target server

42. When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

BGP ECMP

Layer 4 to Layer 7 device package

inline load-balancing device

ITD

43. Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel.

What is the result of this policy?

Cisco UCS Manager creates two separate fabric port channels.

Cisco UCS Manager creates a single fabric port channel.

The port channel is disabled until an administrator enables it manually.

Each uplink that connects an IOM is configured as a discrete link.

44. DRAG DROP

Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

45. Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

Embedded RP

Phantom RP

MSDP

PIM anycast RP

46. 1.What is an advantage of using OTV as compared to VPLS for data center redundancy?

prevents loops on point-to-point links

provides head-end replication

uses a proactive MAC advertisement

provides full-mesh connectivity

47. DRAG DROP

Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.

48. Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?

Cisco Virtual Topology System

Cisco Data Center Network Manager

Cisco Nexus Fabric Manager

Cisco CloudCenter

49. Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

network speed

GPU support

storage capacity

processor count

50. Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)

Layer 3 path for monitoring purposes

Layer 2 path for server traffic

Layer 2 path for a vPC peer link

Layer 3 path for vPC keepalive packets

Layer 3 path for server traffic

Page 6 of 6

51. Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

VSS that has unified uplinks

Ethernet and unified ports on the same port channel

vPC that has unified uplinks

cross-connections with pinning

52. DRAG DROP

Drag the requirements from the left onto the correct policy types on the right.

53. Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

VSS

VDP

DRS

54. Which two methods mitigate congestion in a SAN network? (Choose two.)

Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.

Use the port-monitor command to detect slow drain devices.

Configure the port channel to enable individual buffer-to-buffer credits.

Configure the port monitor to allow categorization of a specific device as slow.

Configure the flow control for the FC to use R_RD

55. Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

subnet address of BD1

subnet address of L3Out

subnet address of BD2

NAT appliance

56. Which two automation requirements can be met by using Puppet? (Choose two.)

Push configuration updates immediately to servers.

Enable clients to pull changes to configuration files.

Enable clients to pull changes without installing an agent.

Provide support for writing new modules in Python.

Enable one-off infrastructure changes to be performed manually.

57. What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

Cisco Intersight automatically creates an invisible cloud witness.

Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.

Cisco UCS Manager provides service profile portability across nodes.

Cisco HyperFlex Edge provides native container support through the KVM hypervisor.

58. Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

NX-API

Postman

Bash shell

Guest shell

59. Which two configurations allow for routing traffic between two VDCs? (Choose two.)

Connect the VDCs to an external Layer 3 device.

Cross-connect the ports between the VDCs.

Create VRF-aware software infrastructure interfaces.

Create a policy map in the default VDC that routes traffic between the VDCs.

Create interfaces in the VDC that can be accessed by another VD

60. Which approach splits a pair of clustered fabric interconnects into two standalone devices?

Run the disable fips-mode command on each fabric interconnect.

Run the connect local-management command on each fabric interconnect.

Erase the configuration of both fabric interconnects.

Unplug the Layer 1 and Layer 2 interfaces between the devices.

[2022] CCNP Data Center 300-610 Las preguntas del examen son válidas para la preparación del examen Cisco 300-610

Author

Deja una respuesta Cancelar la respuesta