Diseño e implementación del examen de práctica de Microsoft Devops Solutions AZ-400 actualizado [2022]

1. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.

You haw a pokey stating that approvals must occur within eight hours.

You discover that deployments only if the approvals take longer than two hours.

You need to ensure that the deployments only fail if the approvals take longer than hours.

Solution: From Post -deployment conditions, you modify the Timeout setting for post-deployment approvals.

Does this meet the goal?

2. You are developing an open source solution that uses a GitHub repository.

You create a new public project in Azure DevOps.

You plan to use Azure Pipelines for continuous build. The solution will use the GitHub Checks API.

Which authentication type should you use?

3. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen

Your company has a project in Azure DevOps for a new web application.

You need to ensure that when code is checked in, a build runs automatically.

Solution: From the Continuous deployment trigger settings of the release pipeline, you enable the Pull request trigger setting.

Does the meet the goal?

4. DRAG DROP

You need to recommend a solution for deploying charts by using Helm and Title to Azure Kubemets Service (AKS) in an RBAC-enabled cluster.

Which three commands should you recommend be run m sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

5. DRAG DROP

You need to implement the code flow strategy for Project2 in Azure DevOps.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

6. Note: This question is part of * series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sett might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.

You have a poky stating that approvals must occur within eight hour.

You discover that deployments fail if the approvals take longer than two hours.

You need to ensure that the deployments only fail if the approvals take longer than eight hours.

Solution: From Post-deployment conditions, you modify the Time between re-evaluation of gates option.

Does this meet the goal?

7. DRAG DROP

Which package feed access levels should be assigned to the Developers and Team Leaders groups for the investment planning applications suite? To answer, drag the appropriate access levels to the correct groups. Each access level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

8. Your company builds a multi tier web application.

>You use Azure DevOps and host the production application on Azure virtual machines.

Your team prepares an Azure Resource Manager template of the virtual machine that you mil use to test new features.

You need to create a staging environment in Azure that meets the following requirements:

• Minimizes the cost of Azure hosting

• Provisions the virtual machines automatically

• Use* the custom Azure Resource Manager template to provision the virtual machines

What should you do?

9. Your company has an on-premises Bitbucket Server that is used for Git-based source control. The server is protected by a firewall that blocks inbound Internet traffic.

You plan to use Azure DevOps to manage the build and release processes

Which two components are required to integrate Azure DevOps and Bitbucket?

Each correct answer presents part of the solution. NOTE: Each correct selection is worth one port.

10. HOTSPOT

You have an Azure virtual machine named VM1 that runs Linux.

You plan to deploy the Desired State Configuration (DSC) extension to VM1.

You need to grant the Log Analytics agent the appropriate directory permissions.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

11. HOTSPOT

You have a project Azure DevOps.

You plan to create a build pipeline that will deploy resources by using Azure Resource Manager templates. The templates will reference secretes stored in Azure Key Vault.

Yu need to ensure that you can dynamically generate the resource ID of the key vault during template deployment.

What should you include in the template? To answer, select eh appropriate options in the answer area. NOTE: Each correct selection is worth one point.

12. You use Azure Artifacts to host NuGet packages that you create.

You need to make one of the packages available to anonymous users outside your organization. The solution must minimize the number of publication points.

What should you do?

13. DRAG DROP

You need to configure Azure Automation for the computers in Pool7.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them m the correct order.

14. DRAG DROP

You need to implement Project6.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them m the correct order.

15. You have 50 Node.js-based projects that you scan by using WhiteSource. Each project includes Package.json, Package-lock.json, and Npm-shrinkwrap.json files.

You need to minimize the number of libraries reports by WhiteSource to only the libraries that you explicitly reference.

What should you do?

16. Your company has a hybrid cloud between Azure and Azure Stack.

The company uses Azure DevOps for its CI/CD pipelines. Some applications are built by using Erlang and Hack.

You need to ensure that Erlang and Hack are supported as part of the build strategy across the hybrid cloud. The solution must minimize management overhead.

What should you use to execute the build pipeline?

17. You plan to share packages that you wrote, tested, validated, and deployed by using Azure Artifacts.

You need to release multiple builds of each package by using a single feed. The solution must limit the release of packages that are in development.

What should you use?

18. HOTSPOT

You are configuring a release pipeline in Azure DevOps as shown in the exhibit.





Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

19. You have a project in Azure DevOps.

You plan to deploy a self-hosted agent by using an unattended configuration script.

Which two values should you define in the configuration script? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

20. To resolve the current technical issue, what should you do to the Register-AzureRmAutomationDscNode command?

21. DRAG DROP

You mc configuring Azure DevOps build pipelines.

You plan to use hosted build agents.

Which build agent pool should you use to compile each application type? To answer, drag the appropriate built agent pools to the correct application types. Each butt agent pool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

22. You are automating the build process for a Java-based application by using Azure DevOps.

You need to add code coverage testing and publish the outcomes to the pipeline.

What should you use?

23. You use Azure SQL Database Intelligent Insights and Azure Application Insights foe monitoring.

You need to write ad-hoc Queries against the monitoring data.

Which Query language should you use?

24. You plan to deploy a new database environment. The solution must meet the technical requirements. You need to prepare the database for the deployment.

How should you format the export?

25. You have Azure Pipelines and GitHub integrated as a source code repository.

The build pipeline has continuous integration enabled.

You plan to trigger an automated build whenever code changes are committed to the repository.

You need to ensure that the system will wait until a build completes before queuing another build.

What should you implement?

26. In Azure DevOps, you create Project3.

You need to meet the requirements of the project.

What should you do first?

27. HOTSPOT

Where should the build and release agents for the investment planning application suite run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

28. Which branching strategy should you recommend for the investment planning applications suite?

29. DRAG DROP

You have an Azure Kubermets Service (AKS) implementation that is RBAC-enabled

You plan to use Azure Container Instances as a hosted development environment to run containers in the AKS implementation.

You need to conjure Azure Container Instances as a hosted environment for running me containers in AKS.

Which three actions should you perform m sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

30. Note: This Question Is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to ft. As a result these questions will not appear in the review screen.

You company has a prefect in Azure DevOps for a new web application.

You need to ensure that when code is checked in, a build runs automatically.

Solution: From the Triggers tab of the build pipeline, you selected Batch changes while a build is in progress

Does this meet the goal?

31. You have a brand policy in a project in Azure DevOps. The policy requires that code always builds successfully.

You need to ensure that a specific user can always merge change to the master branch, even if the code fails to compile. The solution must use the principle of least privilege.

What should you do?

32. Your company deploys applications m Docket containers.

You want to detect known exploits in the Docket images used to provision the Docker containers.

You need to integrate image scanning into the application lifecycle. The solution must expose the exploits as early as possible during the application lifecycle.

What should you configure?

33. During a code review, you discover many quality issues. Many modules contain unused variables and empty catch Modes. You need to recommend a solution to improve the quality o' the code.

What should you recommend?

34. You are developing a multi-tier application. The application will use Azure App Service web apps as the front end and an Azure SQL database as the back end. The application will use Azure functions to write some data to Azure Storage.

You need to send the Azure DevOps team an email message when the front end fails to return a status code of 200.

Which feature should you use?

35. DRAG DROP

You need to recommend project metrics for dashboards in Azure DevOps.

Which chart widgets should you recommend for each metric? To answer, drag the appropriate chart widgets to the correct metrics. Each chart widget may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

36. HOTSPOT

You need to configure a cloud service to store the secrets required by the mobile applications to call the share.

What should you include in the solution? To answer, select the appropriate options m the answer area. NOTE: Each correct selection is worth one point.

37. HOTSPOT

You are using PowerShell to administer Azure Log Analytics workspaces.

You need to list the available workspaces and their properties.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

38. Your company uses cloud-hosted Jenkins for builds.

You need to ensure that Jenkins can retrieve source code from Azure Repos.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct answer selection is worth one point

39. You need to implement Project4.

What should you do first?

40. Your company has a project in Azure DevOps for a new web application.

The company uses Service Now for change management.

You need to ensure that a change request is processed before any components can be deployed to the production environment.

What are two ways to integrate into the Azure DevOps release pipeline? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

41. Topic 4, Mix Questions Set



Note: This question is part of a ser les of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question m this section, you will NOT be able to return to it As a result, these questions will not appear m the review screen

You integrate a cloud-hosted Jenkins server and a new Azure Dev Ops deployment.

You need Azure Dev Ops lo send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.

Solution: You create an email subscription to an Azure DevOps notification.

Does this meet the goal?

42. You are using GitHub as a source code repository.

You create a client-side Git hook on the commit-msg event. The hook requires that each commit message contain a custom work item tag.

You need to make a commit that does not have a work item tag.

Which git commit parameter should you use?

43. DRAG DROP

You need to increase the security of your team's development process.

Which type of security tool should you recommend for each stage of the development process? To answer, drag the appropriate security toots to the correct stages. Each security tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

44. DRAG DROP

Your company plans to deploy an application to the following endpoints:

• Ten virtual machines hosted in Azure.

• Ten virtual machines hosted in an on-premises data center environment

All the virtual machines have the- Azure Pipelines agent.

You need to implement a release strategy for deploying the application to the endpoints.

What should you recommend using to deploy the application to the endpoints? To answer, drag the appropriate components to the correct endpoint. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or soon to view content. NOTE: Each correct selection n worth one point.

45. Topic 3, Woodgrove bank



This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.



To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.



At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.



To start the case study

To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.



Overview

General Overview

Woodgrove Bank is a financial services company that has a main office in the United Kingdom.



Technical Requirements and Planned Changes

Planned Changes

Woodgrove Bank plans to implement the following project management changes:

✑ Implement Azure DevOps for project tracking.

✑ Centralize source code control in private GitHub repositories.

✑ Implement Azure Pipelines for build pipelines and release pipelines.



Woodgrove Bank plans to implement the following changes to the identity environment:

✑ Deploy an Azure AD tenant named woodgrovebank.com.

✑ Sync the Active Directory domain to Azure AD.

✑ Configure App1 to use a service principal.

✑ Integrate GitHub with Azure AD.



Woodgrove Bank plans to implement the following changes to the core apps:

✑ Migrate App1 to ASP.NET Core.

✑ Integrate Azure Pipelines and the third-party build tool used to develop App2.



Woodgrove Bank plans to implement the following changes to the DevOps environment:

✑ Deploy App1 to Azure App Service.

✑ Implement source control for the DB1 schema.

✑ Migrate all the source code from TFS1 to GitHub.

✑ Deploy App2 to an Azure virtual machine named VM1.

✑ Merge the POC branch into the GitHub default branch.

✑ Implement an Azure DevOps dashboard for stakeholders to monitor development progress.



Technical Requirements

Woodgrove Bank identifies the following technical requirements:

✑ The initial databases for new environments must contain both schema and reference data.

✑ An Azure Monitor alert for VM1 must be configured to meet the following requirements:

✑ The commit history of the POC branch must replace the history of the default branch.

✑ The Azure DevOps dashboard must display the metrics shown in the following table.









✑ Access to Azure DevOps must be restricted to specific IP addresses.

✑ Page load times for App1 must be captured and monitored.

✑ Administrative effort must be minimized.



HOTSPOT

You need to configure the alert for VM1. The solution must meet the technical requirements.

Which two settings should you configure? To answer, select the appropriate settings in the answer area. NOTE: Each correct selection is worth one point.

46. HOTSPOT

How should you confrere the release retention policy for the investment planning depletions suite? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

47. Your company « concerned that when developers introduce open source Libraries, it creates licensing compliance issues.

You need to add an automated process to the build pipeline to detect when common open source libraries are added to the code base.

What should you use?

48. HOTSPOT

How should you configure the filters for the Project5 trigger? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

49. Your company uses Azure DevOps for the build pipelines and deployment pipelines of Java based projects. You need to recommend a strategy for managing technical debt.

Which two actions should you include in the recommendation? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

50. Your company uses Service Now for incident management.

You develop an application that runs on Azure.

The company needs to generate a ticket in Service Now when the application fails to authenticate.

Which Azure Log Analytics solution should you use?

51. DRAG DROP

You need to replace the existing DevOps tools to support the planned changes.

What should you use? To answer, drag the appropriate tools to the correct targets. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

52. HOTSPOT

How should you configure the release retention policy for the investment planning applications suite? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

53. You need to meet the technical requirements for monitoring App1.

What should you use?

54. What should you use to implement the code quality restriction on the release pipeline for the investment planning applications suite?

55. Your company uses a Git repository in Azure Repos lo manage the source code of a web application. The master branch is protected from direct updates. Developers work on new features in the topic branches.

Because of the high volume of requested features, it is difficult to follow the history of the changes to the master branch.

You need to enforce a pull request merge strategy.

The strategy must meet the following requirements:

• Consolidate commit histories

• Merge tie changes into a tingle commit

Which merge strategy should you use in the branch policy?

56. Your company plans to use an agile approach to software development

You need to recommend an application to provide communication between members of the development team who work in locations around the world.

The application must meet the following requirements:

• Provide the ability to isolate the members of efferent project teams into separate communication channels and to keep a history of the chats within those channels.

• Be available on Windows 10, Mac OS, iOS, and Android operating systems.

• Provide the ability to add external contractors and suppliers to projects.

• Integrate directly with Azure DevOps.

What should you recommend?

57. HOTSPOT

Your company is creating a suite of three mobile applications.

You need to control access to the application builds. The solution must be managed at the organization level

What should you use? To answer, select the appropriate options m the answer area. NOTE: Each correct selection is worth one point.

58. HOTSPOT

Your company uses Team Foundation Server 2013 (TFS 2013).

You plan to migrate to Azure DevOps.

You need to recommend a migration strategy that meets the following requirements:

✑ Preserves the dates of Team Foundation Version Control changesets

✑ Preserves the changes dates of work items revisions

✑ Minimizes migration effort

✑ Migrates all TFS artifacts

What should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

59. DRAG DROP

You need to implement the code flow strategy for Project2 in Azure DevOps.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange in the correct order.

60. DRAG DROP

You are configuring the Azure DevOps dashboard. The solution must meet the technical requirements.

Which widget should you use for each metric? To answer, drag the appropriate widgets to the correct metrics. Each widget may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

61. You manage build pipelines and deployment pipelines by using Azure DevOps.

Your company has a team of 500 developers. New members are added continual lo the team

You need to automate me management of users and licenses whenever possible

Which task must you perform manually?

62. 1.Topic 1, Litware inc. Case Study: 1



Overview

Existing Environment

Litware, Inc. an independent software vendor (ISV) Litware has a main office and five branch offices.

Application Architecture

The company’ s primary application is a single monolithic retirement fund management system based on ASP.NE T web forms that use logic written in V8.NET. Some new sections of the application are written in C#.



Variations of the application are created for individual customers. Currently, there are more than 80 have code branches in the application’s code base.



The application was developed by using Microsoft Visual Studio. Source code is stored in Team Foundation Server (TFS) in the main office. The branch offices access of the source code by using TFS proxy servers.



Architectural Issues

Litware focuses on writing new code for customers. No resources are provided to refactor or remove existing code. Changes to the code base take a long time, AS dependencies are not obvious to individual developers.

Merge operations of the code often take months and involve many developers. Code merging frequently introduces bugs that are difficult to locate and resolve.

Customers report that ownership costs of the retirement fund management system increase continually. The need to merge unrelated code makes even minor code changes expensive.



Requirements

Planned Changes

Litware plans to develop a new suite of applications for investment planning. The investment planning Applications will require only minor integration with the easting retirement fund management system.

The investment planning applications suite will include one multi-tier web application and two iOS mobile applications. One mobile application will be used by employees; the other will be used by customers.

Litware plans to move to a more agile development methodology. Shared code will be extracted into a series of package.

Litware has started an internal cloud transformation process and plans to use cloud based services whenever suitable.

Litware wants to become proactive m detecting failures, rather than always waning for customer bug reports.



Technical Requirements

The company's investment planning applications suite must meet the following technical requirements:

• New incoming connections through the firewall must be minimized.

• Members of a group named Developers must be able to install packages.

• The principle of least privilege must be used for all permission assignments

• A branching strategy that supports developing new functionality in isolation must be used.

• Members of a group named Team leaders must be able to create new packages and edit the permissions of package feeds

• Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use.

• By default, all App Center must be used to centralize the reporting of mobile application crashes and device types in use.

• Code quality and release quality are critical. During release, deployments must not proceed between stages if any active bugs are logged against the release.

• The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HUPS.

• The required operating system configuration tor the test servers changes weekly. Azure Automation State Configuration must be used to ensure that the operating system on each test servers configured the same way when the servers are created and checked periodically.



Current Technical

The test servers are configured correctly when first deployed, but they experience configuration drift over time. Azure Automation State Configuration fails to correct the configurations.

Azure Automation State Configuration nodes are registered by using the following command.







HOTSPOT

How should you complete the code to initialize App Center in the mobile application? To answer, select the appropriate options in the answer area. NOTE: Each correct selection a worth one point.

63. DRAG DROP

Your company has four projects.

The version control requirements for each project are shown in the following table.





You plan to use Azure Repos for all the projects.

Which version control system should you use for each project? To answer, drag the appropriate version control systems to the correct projects. Each version control system may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

64. Note: This question part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the staled goals. Some question sets might have more than one correct solution, whale others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.

You integrate a cloud-hosted Jenkins server and a new Azure DevOps depsoyment.

You need Azure DevOps to send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.

Solution: You add a trigger to the build pipeline.

Does this meet the goal?

65. Topic 2, Contoso Case Study: 2



Overview

Existing Environment

Contoso, Ltd. is a manufacturing company that has a main office in Chicago.

Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.



The Azure DevOps organization includes:

• The Docker extension

• A deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2016

The Azure subscription contains an Azure Automation account.



Planned Changes

Contoso plans to create projects in Azure DevOps as shown in the following table.







Technical Requirements

Contoso identities the following technical requirements:

• Implement build agents rot Project 1.

• Whenever possible, use Azure resources

• Avoid using deprecated technologies

• Implement a code flow strategy for Project2 that will:

• Enable Team 2 to submit pull requests for Project2.

• Enable Team 2 to work independently on changes to a copy of Project?

• Ensure that any intermediary changes performed by Tram2 on a copy of Project2 will be subject to the same restrictions as the ones defied in the build policy of Project2.

• Whenever possible. Implement automation and minimize administrative effort.

• Implement Protect3, Project5, Project6, and Project7 based on the planned changes.

• Implement Project4 and configure the project to push Docker images to Azure Container Reentry.



DRAG DROP

You need to configure Azure Automation for the computer in Group7.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

66. You plan to create an image that will contain a .NET Core application.

You have a Dockerfile file that contains the following code. (Line numbers are included for reference only.)





You need to ensure that the image is as small as possible when the image is built.

Which line should you modify in the file?

67. DRAG DROP

Your company has a project in Azure DevOps.

You plan to create a release pipeline that will deploy resources by using Azure Resource Manager templates. The templates will reference secrets stored in Azure Key Vault.

You need to recommend a solution for accessing the secrets stored in the key vault during deployments. The solution must use the principle of least privilege.

What should you include in the recommendation? To answer, drag the appropriate configurations to the correct targets. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

68. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that m.ght meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you win NOT be able to return to it. As a result, these questions win not appear in the review screen.

You integrate a cloud- hosted Jenkins server and a new Azure DevOps deployment

You need Azure DevOps to send a notification to Jenkins when a developer commits changes to a branch in Azure Repos.

Solution: You create a service hook subscription that uses the code pushed event.

Does this meet the goal?

69. DRAG DROP

You need to configure access to Azure DevOps Agent pools to meet the forwarding requirements:

• Use a project agent pool when authoring build release pipelines.

• View the agent pool and agents of the organization.

• Use the principle of least privilege.

Which role memberships are required for the Azure 0e%Oos organization and the project? To answer, drag the appropriate role membership to the correct targets. Each role membership may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to content. NOTE: Each correct selection is worth one point.

70. You need to perform the GitHub code migration. The solution must support the planned changes for the DevOps environment.

What should you use?

71. DRAG DROP

You need to use Azure Automation Sure Configuration to manage the ongoing consistency of virtual machine configurations.

Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices in correct. You writ receive credit for any of the orders you select.

72. You need to recommend a Docker container build strategy that meets the following requirements

• Minimizes image sues

• Minimizes the security surface area of the final image

What should you include m the recommendation?

73. You need to configure Azure Pipelines to control App2 builds.

Which authentication method should you use?

74. You need to meet the technical requirements for controlling access to Azure DevOps.

What should you use?

75. You have an Azure Resource Manager template that deploys a multi-tier application.

You need to prevent the user who performs the deployment from viewing the account credentials and connection strings used by the application.

What should you use?

76. Note: This question n part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution

After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen.

You have an approval process that contains a condition. The condition requires that releases be approved by a team leader before they are deployed.

You have a policy stating that approvals must occur within eight hours.

You discover that deployments fail if the approvals lake longer than two hours.

You need to ensure that the deployments only fail if the approvals take longer than eight hours.

Solution: From Pre-deployment conditions, you modify the Timeout setting for pre-deployment approvals.

Does this meet the goal?

77. You add the virtual machines as managed nodes in Azure Automation State Configuration.

You need to configure the computer in Group7.

What should you do?

78. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your company has a prefect in Azure DevOps for a new web application.

You need to ensure that when code is checked in, a build runs automatically.

Solution: from the Triggers tab of the build pipeline, you select Enable continuous integration

Does the meet the goal?

79. DRAG DROP

You need to recommend a procedure to implement the build agent for Project1.

Which three actions should you recommend be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

80. DRAG DROP

You need to configure authentication for App1. The solution must support the planned changes.

Which three actions should you perform in sequence? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.